6
SP120 RGB FAN
SP120 RGB FAN
5
Optional Installation
Installation Continued
>
Find a location for the RGB LED controller that allows the cable to reach
the fan hub and gives you easy access to the buttons.
>
Mount the RGB LED controller with the provided mounting strip.
>
Plug in the 3 pin cable from the fan controller into the fan hub.
>
Plug in the SATA power cable from the fan hub into an unused
SATA power connector from the system PSU.
>
Plug the fan power cable into an unused fan port on your MB or fan controller.
• The fan power cable provides power.
• The RGB LED cable provides power and control for the RGB LED’s.
>
Both cables are required to be plugged into their
respective ports in order for proper operation of the fan.
>
An optional cable is supplied that allows connection to a pushbutton
to operate the mode, color, and speed options from an external source.
>
Chassis buttons such as reset pushbutton or power pushbutton
are examples of pushbutton that would work with the optional cable.
>
Connect the optional cable to the port on the top of the controller
(the connector next to the “SP RGB Controller” on the fan controller.)
