CorroVenta T2 ES, Руководство пользователя

Страница: 14 / 28

© Corroventa Ltd. 2017.02 12 (25)
The Relation mode functions like the Flow mode, the
only difference being that instead of defining a certain
air flow, the user selects what percentage of the
Master machine’s air flow the turbine should maintain.
To select Control Mode, push Change and then use the
right down arrow button to select mode. Push OK to
confirm the selection. In the next step, adjust setpoint
as required.
The current Control Mode is displayed in the top left
corner of the default screen.
Water Separator
Note: This functionality can only be used when the
turbine is connected to a WS4 ES Water Separator.
If the turbine is connected by power cable and by
system cable to a WS 4ES, the turbine can register how
many times the water separator is emptied so as to
allow the user to calculate how much water has been
removed. In addition, the turbine can also present at
what date and time the water separator was last
emptied in order for the user to assess whether or not
there is any more water to be removed.
If this functionality is activated there when there is no
WS 4ES connected, the turbine will remain in standby.
Timer - on/off and quiet mode
If, for some reason, the machine must not operate
continuously but for instance only day time or night
time, the machine can be set to operate on Timer.
For the remainder of the time, the machine can be set
to turn off completely or to operate in quiet mode.
In quiet mode, the speed of the turbine is reduced to
approximately level 4 in order to minimize noise.
When Timer is selected, the word Timer is displayed in
the upper right corner of the default screen.
To activate Timer, enter the Timer menu and push
Activate.
Confirm or, if required, edit the system time and date
which is presented in the following format:
YY:MM:DD / HH:MM.
Push OK.