CorroVenta K3 ES HP, Руководство пользователя

Страница: 15 / 29

© Corroventa Ltd. 2017.07 14 (27)
Network
Note! Install all system cables before the
machines are started.
K3 ES HP has network functions that enable local
interaction between machines, for example
pressure drying and use of external sensors for
relative humidity and temperature control of the
machine. The network functions also prepare
the machine for a future SuperVision system
that will allow remote monitoring and remote
control of the machines via Internet.
A network is established by installing the
machines in the intended way and connecting
them to each other using system cables before
they are started.
Open the network menu on the machine which
is to be master, i.e. control the others.
Press Create and wait while the machine
establishes the network. This can take up to one
minute.
Once the network has been established, the
display switches between the slave units in the
network menu. These are indicated by type (e.g.
A4) and bus address (e.g. 101).
To change the settings for a slave unit, press
Change and select the slave unit. The
background lighting for the selected unit starts
to flash to confirm that the unit has been
selected.
Desired settings can also be made directly on the
relevant machine.
Start the master machine when all desired
settings have been made. The slaves start
automatically within one minute. The machines
are stopped in the same way. Press stop on the
master machine and the slaves stop
automatically shortly afterwards.
As the network is controlled by the master
machine, a slave unit that is started manually is
stopped when the master machine is in standby.
In the same way, a slave unit that is stopped
manually is restarted manually when the master
machine is in operation.