CORRECT CRAFT 216v Скачать руководство пользователя страница 43

Страница: 43 / 248

1-33

Boating Safety

• DO NOT Kitefly.
• Make sure that everyone knows and uses approved skiing

hand signals and common skiing courtesy.

• Be sure to turn off the engine before allowing anyone to

approach the boat.

• The engine MUST be shut down (OFF) before a skier enters

or exits the boat, boarding platform or ladder.

• Every skier MUST always wear a USCG-approved Type III

personal flotation device. Special PFDs are available for high
impact falls into the water.

• Maintain a distance of at least 100 feet from all other

objects, including other boats, piers, rafts, mooring and
navigational buoys, pilings, abutments or any other items.

• Be sure to have an experienced operator and observer in the

boat when skiing.

• Look before you turn the boat to pick up a fallen skier.
• Have ship to shore communication devices if operating at a

significant distance off shore.

• The operator should never retrieve or pick up an article

from the water while the engine is running. The engine
MUST be shut OFF.

• The operator should always keep the skier in view when the

skier is entering or exiting the boat.

•  Communicate skiing speed with the skier before starting.
•  The operator should know the ability level of the skier.
•  The skier should indicate he/she is clear of the boat prior to

starting the boat or putting the boat into gear and tightening
the rope.

• The operator, observer and skier should agree to

communication hand signals before starting.

• Observer in the boat should keep operator appraised of

skier status.

• The operator should always watch the skier as the line is

tightened to start (in case rope wraps around ski or skier).

• The operator should look ahead before starting.
• Start from a safe place with good forward and peripheral

visibility.

• The operator should check direction of the rudder before

starting (in gear, slowly making sure the boat goes straight).

V-Drive Sec 1_2010.qxp:Naut Air Sec 1.qxd 7/22/09 1:42 PM Page 1-33

Содержание 216v

























































































































































































































































Результаты поиска

Содержание 216v

Отзывы:

Похожие инструкции для 216v

Бренды по названию

Популярные бренды

CORRECT CRAFT 216v, Руководство пользователя

Результаты поиска

Содержание 216v

Отзывы:

Похожие инструкции для 216v

Бренды по названию

Популярные бренды