manualshive.com logo in svg

CORRECT CRAFT 2008 2008 70141, Руководство пользователя

Поделиться
Скачать
CORRECT CRAFT 2008 2008 70141 Скачать руководство пользователя страница 113

4-43

Controls and Indicators

Fuel Tank

There is a fuel tank fill cap on the port and starboard side for added
convenience. Use the fuel tank fill cap key to remove the fuel fill
cap to fuel your boat. Use caution when fueling your boat.

The fuel tank is located beneath the aft seat and trunk area. To
inspect the hose connections, raise the floor of the trunk. Your
Correct Craft dealer should perform all fuel tank service.

Explosion or fire can occur under certain

conditions, causing death or serious injury:

• Turn the engine OFF.

• DO NOT smoke or allow open flame or sparks within 50

feet (15 meters) of the refueling area.

• DO NOT refuel unattended, avoid contact and spilling.

• DO NOT refuel indoors.

• DO NOT use a plastic funnel.

• DO NOT allow any spilled fuel to remain on your boats

finish.

• DO NOT allow a fuel system problem to go unchecked.

• Always maintain contact with the fuel nozzle and the

fuel tank to prevent electrostatic spark.

!

WARNING

Nautique Ski Sec 4.qxd:Nautique Ski Sec 4.qxd  6/19/07  4:44 AM  Page 43

Содержание 2008 2008 70141





























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды