-----------------------------------------------------
SAVE THESE INSTRUCTIONS-
----------------------------------------------------
User Manual: TH-1149
3
Ver. 20120307-01
Specifications
Power Supplies: Battery Powered/2 x AA Alkaline
Batteries-(TH-1143SA/TH-1143SB/TH-1143RF Only)
Power Consumption: 5VA
Battery Replacement: Once per year
RF Frequency: 868 MHz or 433 MHz (1143RF Only)
Temperature Display Range: -10°C~50°C
Temperature Display Resolution: 0.1°C
Temperature Control Range:
TH-1149SA/SB/RF: 5°C~35°C
TH-1149MSA/SB/RF: 5°C~30°C
Temperature adjustment scale:
TH-1149MSA/MSB: 1°C
TH-1149SA/SB/RF: 0.2°C
Selectable Switching Differential (hysteresis):
TH-1149MSA/SB: 1.3°C (at 20°C)
TH-1149SA/SB/RF: 0.4°C~1.0°C (default
0.6°C)
Selectable Cycle Rate: 3, 6, 9, or 12 times per hour
(TH-1149MSA/SB/RF models only)
Anti-Freeze Protection: 5°C
Temperature Sensor: NTC 10K Ohm @ 25°C
Operation Instruction
TH-1149M-SA/TH01149-SB
1.
Turn the knob to set the temperature of the
setpoint. When the room temperature reaches the
desired setting, the unit will function to maintain
the set temperature.
2.
Select the operation mode to OFF/Heat
(ForTH-1149M-SA only) or Heat/OFF/Cool (For
TH-1149M-SB)
TH-1149SA/ TH-1149SB/TH-1149RF
1.
Press “Up” or “Down” arrow keys twice and the LCD
will show a flashing temperature with ‘Temperature
Set” symbol.
2.
Proceed and press either the “Up” or “Down” arrow
key to set a desired temperature. Every time you
press the key, the temperature will increase by
0.2˚C/F step and press the “Down” arrow key will
decrease temperature value by 1˚C.
3.
When you completed setting the desired
temperature, please wait for 5 seconds until the
LCD stops flashing and the thermostat starts to
operate. When the room temperature reaches the
desired setting, the unit will function to maintain
the set temperature.
Connect TH-1149RF to Compatible Receivers
1.
Press the connect button on the Receiver.
2.
The red light on the Receiver will begin to flash.
3.
Press the connect button on the TH-1149RF.
4.
“Wireless connect” will appear on the screen of
the thermostat
5.
The thermostat is now connected to the Receiver.
