coronaDesking GO2 WorkCenter, Инструкция по сборке

Страница: 4 / 14

4
eisys/healthcare, inc. corner 10.2010
3. ATTACHING THE TWO FRAMES
Tighten the four screws and nuts to both frames.
•
Line up the hole in the drive shaft on frame 1 with the hole in the drive shaft of frame 2.
(do this by manually raising and lowering the leg on frame 1; it will move freely because
it is not attached to the motor)
Insert threaded pin and tighten.
•
•
Now raise all three (3) legs to the highest position.
•