your receiver’s LED light red, push down and hold the button on your receiver for more than 6
seconds and not more than 10 seconds, release the button to see the green led flash, push down
the button again right now, receiver get back to light red. Now the MODE status has changed
between Special mode and Normal mode. When green led flash low indicate normal mode to
special mode, and green led flash fast indicate special mode to normal mode.
Under the special mode status, you can get S.BUS output feature on the last servo channel,
other channels not changed.
NOTE: if you want to reset the receiver to normal mode, you can rebind the receiver to your
transmitter.
LED statusindicated under normal working status:
RED LED
GREEN LED
Status
on
off
No signal searched
off
solid
Signal is very good
off
flash
Signal is not very good
off
off-flash
Signal is weak
