11
B x 2 pcs
C x 1 pcs
D x 1 pcs
G x 2 pcs
I x 2 pcs
B x 2 pcs
G x 2 pcs
I x 2 pcs
Step 7
7-1:Thread one screw (C) through the hole in the air vent (2) and the lid, Thread the
hex nut (D) onto the screw as shown(C).
7-2:Thread two screws (B) through two steel flat washers (G) and two aluminum
washers(I) and through holes from inside the lid(3).
Step 8
the tracks under the bowl.
Attach the ash catcher handle (17) to the ash catcher (16) slide the ash catcher into
;
J x 2 pcs
