Page
5
of
10
Step 3:
Insert hardware part A using a small mallet (not provided)
DO NOT use any power tools as this may damage the frame and will invalidate any claim
Step 4:
Attach the drawer runners (25) using hardware part F. Secure hardware part M using hardware part B.
You will need to use a screwdriver (not provided)
DO NOT use any power tools as this may damage the frame and will invalidate any claim
Step 5:
Attach the base/shelf panels (3), rear base plinth (8), front base plinth (13) and support plinth (12) to
the left panel (2) using hardware part E and a screwdriver (not provided)
DO NOT use any power tools as this may damage the frame and will invalidate any claim
Содержание 2 DOOR 1 DRAWER WARDROBE
Страница 2: ...Page 2 of 10...
