corob EVOSHAKE 500 V2, Руководство пользователя

Страница: 12 / 26

EVOSHAKE 500 v2
- 10 -
5 MACHINE INSTALLATION
5.1 General warnings
Personnel in charge of these operations must wear the following personal
protective equipment.
5.2 Installation site requirements
The structural design of the EVOshake 500 v2 is geared towards it being functional and user-friendly. To ensure ease of
use, take into account the following details when installing the machine:
1. The machine should be operated at room temperature (10 °C - 40 °C), in a room with no harmful humidity (relative
humidity: 5% - 85%) or drafts and without condensation.
2. The machine must be placed in a clean and dust free place.
3. The room must be ventilated to prevent concentration of harmful fumes.
4. The operating site must have adequate lighting.
5. Place the mains plug in such a place that it can be unplugged without moving the machine.
6. Check that the floor is not slippery or uneven.
7. Reserve 40 cm free space above the machine, as the door opens upwards and needs space.
8. Electrical interface:
220 - 240 V ±5%
50 Hz / 6.3 A
Earthed wall socket.
5.3 Unpacking and placement
Tools required:
• 10 and 17 mm set wrench
One person is enough to carry out the following procedure.
The service representative will install the machine so that it is ready to be used. In addition, he will give training on how
to use the machine.
1. Remove the carton box covering the machine.
2. Remove the cover from top of the EVOshake 500 v2.
3. Check that the EVOshake 500 v2 and accompanying equipment have not been damaged during transport.
4. Check that all the ordered items have been delivered, see the section “4.1 Contents of the basic package” on page 9.
DANGER
To avoid personal injuries and property damage, use the utmost care and caution when handling the machine, and
carefully follow the instructions given in this chapter
WARNING
Only a service representative authorised by the supplier may install the machine.
WARNING
When using colorants containing volatile solvents the room in which the machine is installed must be spacious,
with good ventilation (air exchange) and no type of parts must be leant against or stocked close to the machine.
For indoor use only!
dd
Make sure the packing has not suffered any damage or tampering during shipping; if so, contact the
authorized technical service or your dealer.