corob D600 extra, Руководство пользователя

Страница: 12 / 50

FEATURES
- 12 -
COROB™ D600 - D700 - D800TX
2.3 Standard and optional configurations
D600 TE D600 TI D700 D800TX
Canister capacity
3 Quarts - 4 Quarts - 6 Quarts - 4 Gallons (3 - 4 - 6 - 15 liters)
9.5 Quarts - 5.3 Gallons (9 - 20 liters)
(only on large additional canister modules)
Number of circuits maximum 24 maximum 32
Circuit with Standard pump standard
Nozzle center flow diameter*
1.10” (28 mm) (16)
1.54” (39 mm) (17-20)
1.77” (45 mm) (21-24)
1.10” (28 mm) (16)
1.54” (39 mm) (17-20)
1.77” (45 mm) (21-32)
Punching diameter
1.85” (47 mm) (20)
2.17” (55 mm) (21-24)
47 mm (20)
55 mm (21-32)
Additional canister modules maximum 2 maximum 4
Lift-up Autocap standard
Semiautomatic shelf standard optional standard
Automatic shelf optional standard \ optional
Manually-operated automatic
puncher
optional
(with semiautomatic shelf)
optional
optional
(with
semiautomatic shelf)
Panel roll conveyors standard optional
Laser Bung Hole Locator
(B.H.L.)
optional
No-Dry-Nozzle Humidifier
System
optional
Circuit with LAB pump optional
Circuit with HF pump** optional
* Hole diameter for pre-punched cans = flow di 0.59” (15 mm). The diameter may also vary based on the partition of water/solvent
circuits of the machine. ** One HF circuit replaces two standard circuits.
2.4 Usable cans
D600 TE D600 TI D700 D800TX
Standard
With
puncher
Standard
With
puncher
Standard
With
puncher
Standard
With
puncher
MAX
19.9”
(505 mm)
17.7”
(450 mm)
15.9”
(405 mm)
13.6”
(345 mm)
19.3”
(490 mm)
16.9”
(430 mm)
17.7”
(450 mm)
15.4”
(390 mm)
MIN
*
2.8”
(70 mm)
5.1”
(130 mm)
2.4”
(61.5 mm)
5.1”
(130 mm)
2.8”
(70 mm)
5.1”
(130 mm)
2.8”
(70 mm)
6.1”
(155 mm)
MAX
14.2”
(360 mm)
13.4”
(340 mm)
12.6”
(320 mm)
14.2”
(360 mm)
14.2”
(360 mm)
9.3”
(235 mm)
MIN
2.3”
(60 mm)
3.9”
(100 mm)
2.3”
(60 mm)
3.9”
(100 mm)
2.3”
(60 mm)
3.9”
(100 mm)
3.9”
(100 mm)
* Due to the high fill level of 1-Pint and 1-Quart cans (0.5 and 1-liter cans), COROB advises not to perforate them.