CSE-ATV — opErATing mAnuAl And pArTS liST
2
rev. 07/27/07
ASSEmbly inSTruCTionS:
1. secure the hydraulic ram (part #20) to the base frame with
the screws provided. make sure the release valve is facing
outside the frame.
2. insert the foot pedal (part #21) into the hole over the pump
piston and secure it with the bolt (part #22). insert a pivot
pin through the two holes in front of the release valve and
through the release valve pedal. secure it with the hair
pin provided.
3. place the safety bar (part #28) inside the load frame and
align them with the holes on the frame. insert two securing
bolts through the three of them and secure it with the hair
pin provided.
4. raise the load frame by hand and align the head of the
hydraulic ram with the holes in the middle of the load
frame. secure it with the pivot pin (part #24) provided.
5. insert the pulling handle (part #26) into the hole on the
outside of the load frame and turn the handle to lock
into place.
opErATing inSTruCTionS:
1. make sure lift is on solid, level surface before use.
2. adjust jack position to make sure the atV or motorcycle is
centered before lifting.
3. to raise, pump foot pedal (part #21).
4. engage the safety bar once the load has reached its
desired height.
5. before performing any maintenance or adjustments on atV
or motorcycles, secure the load to lift by connecting two tie
down straps supplied with lift to eyelets on the frame and
hooking other end of straps into eyelets on opposite end of
frame. adjust straps using clamp until snug.
6. before lowering, disengage the safety bar by pulling the bar
toward the load frame (part #25). Loosen and remove tie
down straps.
7. to lower, press the release valve pedal (part #17) slowly.
wArrAnTy CoVErAgE
Cornwell Quality tools Company (“Cornwell”) warrants against defects in material and workmanship on this product for a period of
two (2) years from the date of original retail purchase. subject to the conditions and limitations set forth below, Cornwell will, at its
option, either repair or replace any part of the product(s) that proves defective by reason of improper workmanship or materials.
this warranty does not cover any damage to this product that results from accident, abuse, misuse, natural or personal disaster, or any
unauthorized disassembly, repair, or modification. repairs, disassembly and modification are only authorized to be made by Cornwell
or a warranty service center approved by Cornwell.
wArrAnTy SErViCE
to obtain warranty service, contact your Cornwell dealer.
EXCluSionS And limiTATionS
THiS wArrAnTy And THE rEmEdiES SET forTH AboVE ArE EXCluSiVE And in liEu of All oTHEr wArrAnTiES, rEmEdiES
And CondiTionS, wHETHEr orAl or wriTTEn, EXprESS or impliEd. CornwEll SpECifiCAlly diSClAimS Any And All
impliEd wArrAnTiES, inCluding, To THE EXTEnT pErmiTTEd by AppliCAblE lAw, Any wArrAnTiES of mErCHAnTAbiliTy
And fiTnESS for A pArTiCulAr purpoSE. if CornwEll CAnnoT lAwfully diSClAim impliEd wArrAnTiES undEr THiS
limiTEd wArrAnTy, All SuCH impliEd wArrAnTiES ArE limiTEd in durATion To THE durATion of THiS wArrAnTy.
in no EVEnT SHAll CornwEll bE liAblE To THE purCHASEr or To THE uSEr of A CornwEll produCT for Any SpECiAl,
inCidEnTAl or ConSEQuEnTiAl dAmAgES bASEd upon brEACH of wArrAnTy, brEACH of ConTrACT, nEgligEnCE, TorT,
or Any oTHEr lEgAl THEory. SuCH dAmAgES inCludE, wiTHouT limiTATion, EXpEnSES, loST rEVEnuES, loST SAVingS,
loST profiTS, or Any oTHEr inCidEnTAl or ConSEQuEnTiAl dAmAgES AriSing from THE purCHASE, uSE or inAbiliTy
To uSE THE CornwEll produCT.
some states do not allow the exclusion or limitation of incidental or consequential damages or exclusions or limitation on the duration
of implied warranties or conditions, so the above limitations or exclusions may not apply to you. this warranty gives you specific legal
rights, and you may also have other rights that vary by state.
repair kits and replacement parts are available for many Cornwell products, regardless of whether or not the product is still covered
by a warranty plan.
Cornwell Quality tools Company
667 seville road • wadsworth, oH 44281-1094
