5. Charging the batteries on charging stand
Put the pipet controller on the stand.
Plug the charger into the stand outlet.
Connect the charger to the adapter
and to the main power.
6. Additional information
Charging temperature: 10°C to 35°C.
Before the pipet controller is activated for the first time, the batteries
should be charged.
Full charging time: 7 to 8 hours.
When the batteries are charged, the charging circuit disconnects
automatically.
Service life of the batteries: Approximately 1,000 charging cycles,
if used correctly.
Do not leave the pipet controller discharged for a long period of time.
In case of a planned longer break in using the device, it is
recommended to remove the batteries from the battery
compartment or charge them every few months.
Do not plug the
charger to the pipet
controller while
charging on the
stand
Note:
Do not plug the
charger to the pipet
controller while
charging on the
stand
Note:
2. Charging Stand Options
Do not plug the
charger to the pipet
controller while
charging on the
stand
Note:
