CORNING PS-AU-AIR, Руководство по программированию для пользователя

Страница: 1 / 46

Corning Optical Communications
User Manual | Page 1
GENERAL INFORMATION
PS-MP is a dual port digital transport platform supporting public safety coverage on fibre
optic cable using the CPRI protocol. It adopts Feed-Forward Technology, allowing for
deployment of legacy narrow band solutions while still benefiting from the digital
transmission and filtering functionality. This platform is ideal for P25, DMR, PMR,
GSM-R
&
Tetra technology either as standalone or complimentary with wideband cellular deployments.
The PS-MP system supports programmable band or channel selective. The PS-MP supports
up to 37 dBm output per ban. The PS-MP converts an optical signal to RF and then transmits
at the relevant band and receives the analog RF signal, conditions it, and converts it back to
optical for routing to the PS-AU.
Medium-Power (PS-MP/PS-AU-AIR)
User Programming Manual
Public Safety
This document describes the User Manual for the PS-MP unit.
This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and
QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC
License to operate this device. NOTE: Only authorized person can enter the area where the
antenna is installed. And the person is fully aware of the potential for exposure and can exercise
control over his or her exposure by leaving the area or by some other appropriate means.
Awareness of the potential for RF exposure in a workplace or similar environment can be provided
through specific training as part of a RF safety program.