CORNING LSE 6703, Инструкция по эксплуатации

Страница: 4 / 12

4
CO R N I N G LS E P L AT F O R M R O C K E R S
1.0 General Specifications
Speed Settings 5 to 120 tilts/minute
Timer 0 to 2 hours or continuous
Motion Rocking
Tilt Angle
Fixed 7°
Maximum Load 11 lbs ./5 kg
Ambient operation Range +4°C to 70°C
Dimensions 12 .8 x 14 .2 x 5 .7 in . (32 .5 x 36 x 14 .5 cm)
Weight 11 .7 lbs ./ 5 .3 kg
Electrical 115V, 50/60Hz
230V, 50/60Hz
Warranty 5 years
Platform Size 11 .8 x 11 .8 in . (30 x 30 cm)
2.0 Safety Precautions
Do not use the rocker near water sources. Be sure that water does not
get on the device, especially during the cleaning procedures.
Z Z
Do not expose the rocker to aggressive vapors (e .g ., organic solvents) .
Z Z
Do not insert any objects into the rocker (such as screwdriver or
metal rods) .
Z Z
Never operate the rocker without the platform securely attached .
Z Z
Hazardous samples should be shaken only in appropriate containment
vessels .
1 . Switch on POWER
2 . Set SPEED potentiometer on desired value
3 . Set TIME potentiometer on desired value or on HOLD – continuous
function (yellow light next to HOLD will illuminate)
4 . Press START/STOP button to start rocking
5 . Press START/STOP button to stop rocking (HOLD position) . Device
automatically stops after the set time passes . Note: Pressing the
START/STOP button during operation will reset the timer .
Do not rock flammable or explosive samples!