Quick Installation Sheet | CMA-481-AEN | Page 9
Corning Optical Communications
9.
FIBER CONNECTIONS
IMPORTANT!
Keep in mind the rules for handling and connecting F/O
cables. Refer to HX 2.5 GHz TDD user manual for more information.
Notes:
• HX 2.5 GHz TDD support single-mode fiber
connections and interfaces to the OCH-WDM
located at the headend via the fiber patch
panel.
• HX 2.5 GHz TDD supports connections to
OCH-WDM, whereas the HX4 and HX WCS
support connections to BUs.
Open cabinet door to access HX 2.5 GHz TDD module(s) with the
fiber optic interface, route the DL and UL fibers through the front
door slot (see Figure 15) and connect the fiber optic cable pigtails
from splice box, leading from the OCH port, to the corresponding
HX 2.5 GHz TDD module SC APC “Optic Port” (MIMO models include
two service modules with fiber connections).
Figure 15. HX 2.5 GHz TDD Fiber Connections to OCH
(MIMO)
