6. Troubleshooting
6.1
If your cleaver begins to perform inconsistently, or fails to
make acceptable cuts, you may be able to easily correct the prob-
lem without returning your cleaver for factory servicing by fol-
lowing the instructions in Table 1.
Table 1
6.2
If the cleaver still does not work properly, and you wish to:
return the cleaver for service, contact your Corning Cable
Systems Customer Service Representative at (800) 743-2671.
P
age 6 SRP-001-055 Issue 11
Problem Corrective action
Poor cleave quality Check tension switch, clean
per step 5.1
Fiber breaks under clamps Clean cleaver clamps per step
5.1 a
Cleaver blade misses Remove and reinstall blade
fiber per steps 5.8 - 5.14
Cleaver blade pushes fiber Remove and reinstall blade
out of place per steps 5.8 - 5.14
Spring action of cleaver cover Replace vertical spring per
weak or missing
steps 5.17 - 5.23
Corning Cable Systems reserves the right to improve, enhance, and modify
the features and specifications of Corning Cable Systems’ products without
prior notification.
All trademarks are the property of their respective holders
Corning Cable Systems is ISO 9001 certified.
© 2003 Corning Cable Systems LLC. All rights reserved.
Printed in U.S.A.
Corning Cable Systems LLC
PO Box 489
Hickory, NC 28603-0489 USA
For US and Canada 1-800-743-2673
International 828-901-5000
FAX: 828-901-5973
http:www.corning.com/cablesystems
Special Note:
Fiber Optic
Training
Programs
Corning Cable Systems offers comprehensive, integrated training pro-
grams. Courses are structured for: Telephony, CATV, LAN, Intelligent
Transportation Systems and Power Utilities.
For information on Engineering Services Training call: 800-743-2671.
