CORNING EDGE Splice Cassette Скачать руководство пользователя

Страница: 1 / 7

000-274, Issue 4

STANDARD RECOMMENDED PROCEDURE 000-274 | ISSUE 4 | AUgUST 2016 | PAgE 1 OF 7

EDgE™ Splice Cassette/

EDgE™ Field-Terminated

Cassette

related literature |

003-794

Instruction, EDgE™ Solution

004-048

Instruction, Accessing Individual Fibers in Ribbon Fiber Optic Cables with the

TKT-050 Kit

001-059

Instruction, Fiber Organizer Tape Applicator (FOTA) Operator Manual

LAN-307-EN

Specification Sheet, Fiber Optic Splicing Tool Kits

LAN-1550-AEN

Visual Installation Instruction, 250 µm Fiber

1. Carton Contents

a. EDgE Splice Cassette containing:

•

(12) 40 mm splice protectors (for single-fiber

installation)

•

(1) 40 mm splice protector (for ribbon

installation)

b. EDgE Field-Terminated Cassette

2. Tools and Materials

•  Hook blade
•  Measuring tape
•  Scissors
•  4-in cable ties
•  900 µm tubing
•  Electrical tape

For Ribbon Installation:
• 1/4-in braided tubing

(p/n 06-710-27)(optional)

• Friction tape

For Single-fiber Installation

• Miller

three-hole stripping tool

• Ring cutting tool (p/n 3204002-01)

3. Preparing the Cable

CAUTION:

The wearing of cut-resistant safety gloves to protect your hands from accidental injury

when using sharp-bladed tools and armored cable is strongly recommended. Use extreme care

when working with severed armor. There will be a sharp edge where armor is cut. To minimize

the chance of injury from the cut armor, cover the exposed edge with a wrap of electrical tape. To

minimize the chance of injury from sharp-bladed tools, always cut away from yourself and others.

Dispose of used blades and armor scrap properly.

CAUTION:

Recommend the use of safety glasses (spectacles) conforming to ANSI Z87, for eye

protection from accidental injury when handling chemicals, cables, or working with fiber. Pieces of

glass fiber are very sharp and have the potential to damage the eye.

CAUTION:

Fiber optic cable is sensitive to excessive pulling, bending, and crushing forces.

Consult the cable specification sheet for the cable you are installing. Do not bend the cable more

sharply than the minimum recommended bend radius. Do not apply more pulling force to the

cable than specified. Do not crush the cable or allow it to kink. Doing so may cause damage that

can alter the transmission characteristics of the cable; the cable may have to be replaced.

TPA-4067

Содержание EDGE Splice Cassette








Результаты поиска

Содержание EDGE Splice Cassette

Отзывы:

Похожие инструкции для EDGE Splice Cassette

Бренды по названию

Популярные бренды

CORNING EDGE Splice Cassette, Руководство пользователя

Результаты поиска

Содержание EDGE Splice Cassette

Отзывы:

Похожие инструкции для EDGE Splice Cassette

Бренды по названию

Популярные бренды