1LAN-SDAN-8293
Software Defined
Access Node
Quick Installation Guide
QUICK INSTALLATION SHEET I SDLAN-000-8293 I APRIL 2018 I
Page 7
5 DC Wiring Connections |
NOTE:
The 8293 Access Node can be remote
powered with composite cable or local
powered with power supply (1LAN-
SDANPWRSUP2)
Step 1
Identify the positive and negative terminals
on the DC connector. The wiring sequence is
positive to positive and negative to negative
as shown in Figure 9.
Figure 9 Terminating DC power connection
Figure 10 ONT Power Port
Step 2
Open the terminal block screw above the
negative feed position and then insert the
exposed black wire (negative feed) into the
terminal block.
Step 3
Torque the terminal block captive screw
(above the installed wire lead), securely.
Step 4
Repeat the same process as in Step 2 and
Step 3 for remaining positive feed (exposed
red wire).
Step 5
Plug the DC connector into the power port on
the ONT.
Step 6
If using local power supply plug power supply
into supplied 120V power outlet to power unit
(1LAN-SDAN-PWRSUP2).
