background image

 

---------------------------------------------------------------------- 
 

PLAYING THE KEYBOARD 

 
---------------------------------------------------------------------- 
 
The Quadrant keyboard is a mono-touch instrument: you can play one 
note at a time. 
 
To raise the keyboard by an octave, 

tap

 the right button once. 

To lower the keyboard by an octave, 

tap

 the left button once. 

 
 
---------------------------------------------------------------------- 
 

USING THE POTS TO CONTROL PARAMETERS 

 
---------------------------------------------------------------------- 
 
The pots can be used to control 18 different parameters, a pair at a 
time.  
 
By 

pressing

 (not 

tapping

) the left and right buttons you can change 

which pair of parameters the pots control.  Each time a button is 

pressed

, its associated LED (red LED for left button, blue LED for 

right button) will change state (from OFF to ON to BLINKING, back to 
OFF etc.) 
 
Below is a chart showing which pair of parameters the pots control 
when the LEDs are in a given state: 
 
   red LED    blue LED         top POT                bottom POT 
   -------    --------   -------------------      ------------------- 
     OFF         OFF          echo WARP             echo DELAY time 
      ON         OFF        echo FEEDBACK          lead/echo BALANCE    
   BLINK         OFF        panning FREQ             panning DEPTH 
     OFF          ON        autowah FREQ             autowah DEPTH 
      ON          ON        autowah CUTOFF          echo PULSE WIDTH 
   BLINK          ON         [ reserved ]             [ reserved ]                
     OFF       BLINK       envelope ATTACK*          envelope DECAY*          
      ON       BLINK       envelope SUSTAIN*        envelope RELEASE* 
   BLINK       BLINK         echo SUSTIME            lead PORTAMENTO 
 
  * these pots can be configured via the Parameter Menu (see next  
    section) to control:  
     
     1) only the LEAD voices 
     2) only the ECHO voices  
     3) both the LEAD and ECHO voices

 

 

Содержание Quadrant









Отзывы: