3. NEEDLE PLATE SETTING
The needle should pass the needle plate in one of the 12 foreseen holes.
Use the hole just in front from where the threaded needle is coming out of the
needle plate.
Choose a convenient hole so that the needle can pass freely though the hole. The
needle must be exactly in the middle of the hole.
Don’t use too large holes, especially with thin material.
If this is not the case, do the following :
To turn the plate : C.01707 (Fig. 3), unscrew part C.00056 (Fig. 2) and use the
curved point knife.
If the hole is correctly placed, screw part C.00056 again. (Fig.2)
C.00946A
C.00601C01/2/3
C.00051
C.01707
FIG. 3
4.FEEDDOG SETTING
The Cornely LG3 is normally equipped with 1 rubber feeddog : C.00946A.
We are using the feeddog with teeth C.00946D when using hard fabric. The other
feeddog is used for fine fabric. (Fig. 4)
By raising lever C.00051 (Fig. 3), you are moving the feeddog upwards.
C_LG3_MANUAL
11/01/2006
6
From the Library of Superior Sewing Machine & Supply LLC
