CONTROLS
INPUT
Jack plug input connection for your electric guitar.
High impedance input connections for instruments.
VOLUME
Adjusts the gain of the pre-amp and is used to set the
overall volume of the amplifier.
EQ CUT
This is a bypass for the tone controls (tone stack).
When in the ‘cut’ position, the tone controls do not operate
and you will find a large increase in gain.
TREBLE
The treble control increases the high frequency response.
BASS
The bass control increases the low frequency response.
OUTPUT SWITCH
This switch alters the output power: Position A=10 Watts,
position B=2 Watts, position C=1/4 Watt, position D=1/8 Watt.
Note that, unless the volume is adjusted above the power
selected, you will not notice any change in output level.
OUTPUT
The output jack socket is to be connected to an 8 Ohm
speaker load.
MAINS INDICATOR
When illuminated, there is power to the amplifier.
MAINS FUSE
The fuse holder contains the mains fuse for the amplifier. The
mains fuse protects the amplifier from electrical faults.
HT FUSE
Protects the output valve.
Replace a failed fuse only with the same type and rating.