Putting the Inner Pot into the
Outer Pot
Dry clean the outer surface of the Inner Pot
and the Electronics Heater before putting the
Inner Pot into the Outer Pot. Do not place
any material on the surface of the Electronics
Heater and inside the Outer Pot.
After that, turn the Inner Pot left and right to
ensure a firm contact between the Inner Pot
and the Electronic Heater.
Open the Lid
Take the Inner Pot and place food
and water into the Inner Pot.
The amount of water and food shall not exceed 4/5 of the
height of Inner Pot.
For food that will swell in water, the level should not exceed
3/5 of the Inner Pot.
The minimum allowable level would be 1/5 of the Inner Pot.
Hold the Handle and turn it clockwise until
reaching the end position. Then, lift the Lid
upward.
In the case of rice cooking, the maximum amount of rice
allowed for 6L are 12 cups. Normally one cup of rice will
need one cup of water for cooking rice. But this can be
adjusted according to the taste of individuals.
*
4.3 Operation
4. Operating Instructions
EN
07
