Viper Low overrun Service Manual
© 2016, Cornelius Inc
- 13 -
Publication Number: 621360241LOEWSE
C
ONTROL
P
ANEL
M
ENU
D
ESCRIPTIONS
The following section describes the information displayed on each control panel menu and the interactions and set-
tings that are controlled by that menu.
System Menus
The system menu structure allows the user to control the unit through the control panel. Operational settings,
optional parameters, troubleshooting and error information are controlled through this menu system.
The Barrel Status menu, shown in Figure 8, is the home screen for the unit. During normal operation, this screen is
displayed on the control panel. Refer to Table 2 for button functions.
Figure 8. Main Screen
Main Menu
To access the menus for the system from the Barrel Status menu, press the MENU button. This displays the Select
menu, shown in Figure 9. The Setup and Maintenance menus are accessed through the buttons shown at the bot-
tom of the display.
NOTE: If security is turned on, the MAINT button is not displayed.
Figure 9. Select Screen
Table 2.
Button
Description
MENU
Displays the Main menu
ON
Turns on the highlighted barrel
OFF
Turns off the highlighted barrel
DFRST
Initiates a manual defrost on the highlighted barrel. Manual defrost is
limited to a two minute cycle. If the barrel is off, this selection initiates a
full defrost cycle.
SPIN
Turns off refrigeration, if on and mixes the product in the barrel.
BARREL
STATUS
12:51P
MAR 04
#1 FREEZE 87
#2 FREEZE 68
MENU ON OFF DFRST SPIN
BACK
MAIN
SETUP MAINT GO
SELECT
12:51P
MAR 04
UNIT DATA
ERROR STATUS
ERROR LOG
