SELECT
12:51P
MAR 04
BARREL MAINT
MANUAL DIAG
TOTALS
BRIX SETUP
MOTOR SETUP
SYSTEM
BACK MAIN SETUP
MAINT
GO
Viper Service Manual
© 2008-2016, Cornelius Inc.
- 31 -
Publication Number: 621260373SER
Figure 24. Select Screen
Barrel Maintenance Menu
The Barrel Maintenance menu, shown in Figure 25., allows the service technician to clean, rinse and sanitize the
system on a barrel by barrel basis. The barrel must be OFF in order to perform the barrel maintenance functions. As
a warning to the technician, the “Do Not Drink” status indicators are illuminated on the barrels when entering the
Barrel Maintenance menu.
The procedure for purging a barrel is shown in Table 19. The procedure for filling a barrel is shown in Table 20. The
procedure for running the scraper blade only on a barrel is shown in Table 21 and the procedure for waking up a
barrel is shown in Table 23.
BARREL
MAINT
12:51P
MAR 04
#1 PURGE
#2 OFF
BACK PURGE FILL SPIN
Figure 25. Barrel Maintenance Screen
Purging a Barrel
NOTE: When the PURGE button is pressed, it changes to a STOP button.
Table 19.
Step
Action
Procedure
1
Purge a barrel
From the Select menu (Figure 24.), open the Barrel Maintenance menu,
shown in Figure 25.
2
Select the barrel
Use the Up and Down arrows to highlight the desired barrel
3
Select Purge function
Press the PURGE button at the bottom of the display to select purge for the
highlighted barrel
4
Empty the barrel
Place a container under the barrel dispensing valve, open the dispensing
valve and dispense all the product from the barrel. As the product level lowers
in the barrel, partially close the valve to avoid spurting.
5
Complete the proce-
dure
When the barrel is completely empty, close the dispensing valve and press
the STOP button at the bottom of the display to turn off the purge. Press the
BACK button to return to the Select menu.
