3
KIT 02394
NOTE:
For dispensing Scotsman MH 750 “nugget” style ice and Wilshire MCC550 and MCC700 compressed
ice cubes:
1. Disconnect power to dispenser.
2. Remove Merchandiser from dispenser.
3. Remove ice chute and discard gate restrictor.
4. Install ice diverter on gate mounting plate as shown below.
5. Apply RTV to back surface of ice diverter, to seal to gate mounting plate.
6. Reinstall gasket and ice chute.
7. Reinstall merchandiser and energize unit.
FLANGE EXTENDS
INTO STORAGE
HOPPER THROUGH
GATE OPENING
APPLY RTV TO
THIS SURFACE
TO SEAL TO
HOPPER GATE
MOUNTING
PLATE
10--32 NUT
10--32
WASHER
ICE DIVERTER
STORAGE
HOPPER
GASKET
GATE MOUNTING PLATE
ICE CHUTE
COVER
ICE CHUTE
FIGURE 1. ICE DIVERTER KIT
