Cornelius QUEST ELITE 4000 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 32

background image

The products, technical information, and instructions contained in this manual are subject to change without notice.
These instructions are not intended to cover all details or variations of the equipment, nor to provide for every possi-
ble contingency in the installation, operation or maintenance of this equipment. This manual assumes that the per-
son(s) working on the equipment have been trained and are skilled in working with electrical, plumbing, pneumatic,
and mechanical equipment. It is assumed that appropriate safety precautions are taken and that all local safety and
construction requirements are being met, in addition to the information contained in this manual.

This Product is warranted only as provided in Cornelius’ Commercial Warrant applicable to this Product and is sub-
ject to all of the restrictions and limitations contained in the Commercial Warranty.

Cornelius will not be responsible for any repair, replacement or other service required by or loss or damage resulting
from any of the following occurrences, including but not limited to, (1) other than normal and proper use and normal
service conditions with respect to the Product, (2) improper voltage, (3) inadequate wiring, (4) abuse, (5) accident,
(6) alteration, (7) misuse, (8) neglect, (9) unauthorized repair or the failure to utilize suitably qualified and trained per-
sons to perform service and/or repair of the Product, (10) improper cleaning, (11) failure to follow installation, oper-
ating, cleaning or maintenance instructions, (12) use of “non-authorized” parts (i.e., parts that are not 100%
compatible with the Product) which use voids the entire warranty, (13) Product parts in contact with water or the
product dispensed which are adversely impacted by changes in liquid scale or chemical composition.

Contact Information:

To inquire about current revisions of this and other documentation or for assistance with any Cornelius product con-
tact:

www.cornelius.com

800-238-3600

Trademarks and Copyrights:

This document contains proprietary information and it may not be reproduced in any way without permission from
Cornelius.

This document contains the original instructions for the unit described.

CORNELIUS INC

101 Regency Drive

Glendale Heights, IL

Tel: + 1 800-238-3600

Printed in U.S.A.

«
1
2
3
4
...
»

Содержание QUEST ELITE 4000

































Отзывы:

Нет отзывов

Похожие инструкции для QUEST ELITE 4000

Бренд: tatsuno Страницы: 13

Бренд: Yaesu Страницы: 12

REVERSE OSMOSIS

Бренд: B&R Industries Страницы: 14

AccuDose 3874GBA-2

Бренд: Hydro Страницы: 4

Бренд: Monument Water Systems Страницы: 36

Бренд: Shopnsave Страницы: 7

Бренд: Perrin & Rowe Страницы: 2

BOTTLE-FREE WATER DISPENSER

Бренд: Permatech Страницы: 17

Бренд: ALPATEC Страницы: 16

Calcium Automat 3170

Бренд: Tunze Страницы: 80

Бренд: VOCO Страницы: 169

Preeflow eco-PEN600

Бренд: ViscoTec Страницы: 32

Бренд: H2OPTIMO Страницы: 38

Бренд: Bartscher Страницы: 10

SCWT14WQ1K Series

Бренд: Halsey Taylor Страницы: 5

Бренд: Halsey Taylor Страницы: 5

Бренд: Waters Страницы: 2

Бренд: Yum Asia Страницы: 11

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды