Ice Maker Adapter Kit Installation Instructions
Publication Number: 620917305
- 2 -
© 1999-2010, IMI Cornelius Inc.
B. Set the ice maker onto the lid.
Note: If installing the ice maker from front of the dispenser, use a
length of 3/4-inch diameter or larger PVC pipe as a “roller” to slide the ice maker over the front
“drip” flange of the dispenser lid.
C. Wipe away any excess RTV.
4.
Using the slotted holes in the adapter lid as a template, drill four (4) 0.147” diameter holes (No. 26 drill) into the
dispenser cabinet (see Detail A of Figure 1). Use extreme care not to drill into the ice storage bin. Secure the lid
to the dispenser with four (4) No. 10 sheet metal screws.
5.
Install ice maker mounting brackets two (2) as shown in Figure 1. Using the brackets as templates, drill 0.147”
inch diameter holes into the ice maker cabinet and the adapter lid. Use extreme caution not to drill into any ice
maker components (condenser, tubing, etc.). Secure the brackets to the ice maker cabinet with the No. 10 sheet
metal screws provided in the kit.
6.
Follow the ice makers Manufacturer’s instructions to complete installation of the ice maker
7.
IMPORTANT: The bin thermostat bracket (item 7) must be installed (see Figure 2) in order to prevent overfilling
the ice storage bin
A. Remove the ice maker front panel.
B. Locate the bin thermostat on the lower-right side wall of the ice drop area and remove the two (2)
thumbscrews that hold the bin thermostat in place.
C. Mount the bin thermostat to the bracket (item 7) provided with the kit as shown in Figure 2.
D. Using the thumbscrews from step B preceding, secure the “kit” bracket/bin thermostat assembly from
step C preceding to the same ice drop area position. The purpose of this “kit” bracket is to lower the bin
thermostat for proper filling of the ice storage bin.
E. Replace the ice maker front panel.
8.
Install the caution label (item 10) on the manual fill cover (item 2) and secure the cover to the adapter lid with the
No. 8-32 thumbscrew.
9.
The ice maker/dispenser is ready for operation.
CAUTION:
!
Bin Thermostat must not interfere with the agitator rotation.
