Cornelius JT20D, Руководство оператора, Страница: 11 / 18

Operators Manual
© 2018, Cornelius Inc. - 7 - Publication Number: 620920865
INSTALLATION AND OPERATING INSTRUCTIONS
S
ETTING
U
P
Y
OUR
JT20D
1. Set dispenser chassis in desired location. Dispenser should be level and located on a solid counter.
2. Be sure dispenser has adequate free space on both sides; approximately 3" away from any wall or
obstruction.
C
LEANING THE
D
ISPENSER
1. Removing the push handles. See Figure 1.
Handle Support
Clips
Handle
Tube Path
Spout
Sealing Button
Figure 1.
A. Push handle back until it stops.
B. Grasp the clips on the handle. Squeeze clips until they are free from the panel. Pull straight down on the
handle.
2. Disassemble the bowl, lid, gasket. and pump housing assemblies.
CAUTION:
!
Abrasive cleaners scratches the plastic parts. DON’T USE abrasive cleaners.