Brix Setup:
Setting Left Side Water Flowrate
1.
Place your brix cup under the appropriate nozzle.
2.
Tap the appropriate valve to activate the dispense and capture the volume.
a)
Adjust the flow control as needed to achieve the correct flow rate; rotate clockwise for more flow and
counterclockwise for less flow. Repeat for remaining water valves, you MUST set flow rate for all
water.
b)
Tap carb water to check total CW flow rate, it will activate CW1 and CW2 – adjust CW 1 as needed
c)
Tap plain water to check total PW flow rate, it will activate PW1 and PW2 – adjust PW 1 as needed
Note: You do not need to check water every time you check your syrup.
When you activate a valve, it will dispense for a pre-programmed
4 second dispense.
Left Side Flowrate Target:
CW1 = 7oz.
CW2 = 3oz.
PW1 = 7oz.
PW2 = 3oz.
Carb Water = 10oz.
Plain Water = 10oz.
CW
1
CW
2
PW
1
PW
2