Cornelius FlavorFusion P/N 629088673 Скачать руководство пользователя страница 3

Страница: 3 / 4

FlavorFusion Icemaker Adaptor Kit Installation Instructions

- 3 -

Publication Number: 629088673INS

Place ice slide into ice drop opening in bin (see Figure 3).

FIGURE 3

Place bar into first set of pockets inside the ice bin.

Place Icemaker Adaptor Kit on top of unit.

Place icemaker on top of kit. DO NOT slide icemaker into position on the lid.

Apply continuous bead of NSF international (NSF) listed silastic sealant (Dow 732 or equivalent),

supplied in kit, to seal the icemaker to the top of the adapter kit. All excess sealant must be wiped
away immediately.

ICE
SLIDE

Содержание FlavorFusion P/N 629088673

Страница 1: ...talling adaptor following all lock out tag out procedures established by the user Verify all of the power is off to the unit before performing any work Failure to comply could result in serious injury...

Страница 2: ...position and secure the kit to the dispensing unit Whenever possible this should be done prior to lifting the dispenser onto the counter to allow sufficient access and also provide easier and faster i...

Страница 3: ...ce bar into first set of pockets inside the ice bin 5 Place Icemaker Adaptor Kit on top of unit 6 Place icemaker on top of kit DO NOT slide icemaker into position on the lid 7 Apply continuous bead of...

Страница 4: ...ll result in damage to the sliding arm mechanisms internal to the kit Drill four holes of the same diameter into the icemaker 2 per side Ensure the location of the brackets will not damage the kit or...