ED2XX Dual Mounting Kit Installation Manual
Publication Number: 620914101
- 2 -
© 1998-2010, IMI Cornelius Inc.
7.
Install front mounting plate (item 3) using the four beverage panel mounting screws at the center of the
Units. The rectangular plate is for use with the six or eight valve Units.
8.
Apply RTV (item 5) at the gasket–cabinet joint to seal any gaps between the Units, on all sides of the gasket.
9.
Using one screw on each cabinet at the center of the Units (above the drip trays), install drip tray cover to match
color of the drip tray. The drip trays must be at the same height along the edges for cover to fit properly.
10. Assemble two long #8-32 screws (item 9) to lower panel (item 1) using plastic washers (item 10). Install
lower panel assembly on Units.
11. Install Cornelius logo (item 11).
12. Replace hopper covers on the Units, manual fill Units.
13. Connect power cords for Ice/Beverage Dispenser to electrical outlet. Check Dispensers for proper operation.
Figure 1.
