Cornelius ED 175, Руководство по установке

Страница: 3 / 7

DF/EDXXX Lid Kit Installation Instructions
© 2001-2011, IMI Cornelius Inc. - 3 - Publication Number: 620919549
!
WARNING
:
Disconnect power to the unit before installing the adaptor following all lockout/tag out procedures established by the
user. Verify that all the power is off to the unit before performing any work.
Failure to comply could result in serious injury, death or damage to the equipment.
!
WARNING
:
All ice baffle plates and bin stats, if included or recommended in this kit, must be installed as directed in this manual or
the equipment manufacturer’s instructions.
Failure to comply could result in serious injury, death or damage to the equipment.
!
WARNING
:
All of the attachment screws and plates must be installed as directed in this manual.
Failure to comply could result in serious injury, death or damage to the equipment.
IMPORTANT: For DF/ED300 models, adjust the automatic agitation timer located in the dispenser’s
electrical control box to 5 seconds on, 20 minutes off. Access to the timer is provided by
removing the merchandiser/upper front panel.
1. Unpack and inspect the kit. Refer to Figure 1 and Figure 2 for component details.
2. Insert the ice baffle (item 3) into the lid assembly (item1, Figure 1).
IMPORTANT: The baffle prevents ice from overfilling the manual fill area during agitation/ dispensing
with a full storage bin and forcing the manual fill cover off.
3. Place the sealing washers (item 10) over the studs and flat washers (item 11) then fasten in place with the
nylon acorn nuts (item 9).
4. Set the lid assembly onto the dispenser. Using the slotted holes on the side of the lid as a template, drill
four (4) 9/ 64” diameter holes at the bottom of the slots (Figure 2).
Table 3. Kits for use with Cornelius Xtreme 10301230 30” Dual Curtain Ice Makers
Dispenser
ED 2XX
(Black)
DF 2XX
(Gray)
ED 2XX
(Gray)
ED 300
(Black) DF/ED 300
(Gray)
Item No. Kit Number 629087942 629087945 629087946 629087943 629087944 Qty.
Components
1 Lid Assembly 620027305 620027305 620027305 29505 29505 1
2 Cover 52969 52970 53003 52946 52964 1
3
Baffle Ice ED150
Adapter Lid
620042928 620042928 620042928 620042919 620042919 1
4 Bin-Stat Kit 631500074 631500074 631500074 631500108 631500108 1
5 Bracket 620027306 620027306 620027306 2212722127 22127 2
6 Screw, Mounting 70217 70217 70217 70217 70217 6-8
7 Gasket 620050102 620050102 620050102 620050102 620050102 103”
8 Label 90221 90221 90221 90221 90221 1
9 Acorn Nut, Nylon 620701902 620701902 620701902 620701902 620701902 2-4
10 Sealing Washer 620701901 620701901 620701901 620701901 620701901 2-4
11 Nylon Washer 621701903 621701903 621701903 621701903 621701903 2-4