background image

The products, technical information, and instructions contained in this manual are subject to change without notice. 

These instructions are not intended to cover all details or variations of the equipment, nor to provide for every possible 
contingency in the installation, operation or maintenance of this equipment. This manual assumes that the person(s) 
working on the equipment have been trained and are skilled in working with electrical, plumbing, pneumatic, and 
mechanical equipment. It is assumed that appropriate safety precautions are taken and that all local safety and con-
struction requirements are being met, in addition to the information contained in this manual.

This Product is warranted only as provided in Cornelius’ Commercial Warrant applicable to this Product and is subject 
to all of the restrictions and limitations contained in the Commercial Warranty.

Cornelius will not be responsible for any repair, replacement or other service required by or loss or damage resulting 
from any of the following occurrences, including but not limited to, (1) other than normal and proper use and normal 
service conditions with respect to the Product, (2) improper voltage, (3) inadequate wiring, (4) abuse, (5) accident, (6) 
alteration, (7) misuse, (8) neglect, (9) unauthorized repair or the failure to utilize suitably qualified and trained persons 
to perform service and/or repair of the Product, (10) improper cleaning, (11) failure to follow installation, operating, 
cleaning or maintenance instructions, (12) use of “non-authorized” parts (i.e., parts that are not 100% compatible with 
the Product) which use voids the entire warranty, (13) Product parts in contact with water or the product dispensed 
which are adversely impacted by changes in liquid scale or chemical composition.

Contact Information:

To inquire about current revisions of this and other documentation or for assistance with any Cornelius product con-
tact:

www.cornelius-usa.com

800-238-3600

Trademarks and Copyrights:

This document contains proprietary information and it may not be reproduced in any way without permission from 
Cornelius.

This document contains the original instructions for the unit described.

CORNELIUS INC

101 Regency Drive

Glendale Heights, IL 

Tel: + 1 800-238-3600

Printed in U.S.A.

Содержание CH750

















Отзывы: