Automated Beverage System
© 1999 The Coca-Cola Company, Cornelius and
McDonald’s Corporation. All Rights Reserved.
45
B. Locate and remove any debris from the drain trough and cold plate. Make sure the drain holes
are not clogged.
C. Reinstall the cold plate access cover and splash panel.
5. Remove the agitator retainer and the ice agitator assembly.
6. Using a long handled nylon bristle brush, clean the interior of the hopper, top cover, agitator,
agitator cover and cold plate with warm, soapy solution. The cold plate is to be cleaned by
reaching through the ice opening into the hopper bottom with the long handle brush. Be certain to
clean the entire surface area of the cold plate including all the corners. Thoroughly rinse the
hopper, top cover, agitator, agitator cover and the cold plate with clean potable water.Automated
Beverage System
7. Using a long handle nylon bristle brush, clean the interior of the ice chute with the warm, soapy
solution. Access to the to the ice chute can be gained via the interior of the hopper and the ice
chute outlet on the front of the ABS unit. Thoroughly rinse the ice chute with clean, potable water.
8. Reinstall the agitator assembly.
9. Using a mechanical spray bottle filled with sanitizing solution, spray the entire interior of the ice
bin, ice chute and ice agitator assembly. Allow to air dry.
10. Turn the ABS unit power switch ON.
11. Return the ABS unit to AUTO mode.
Monthly Cleaning/Sanitation Procedures
