Plug your Outlet Module into an outlet close to your Gateway.
Connect your Gateway to your WiFi router with the Ethernet Cable.
The Gateway should be placed 3 feet from the router.
Page 2
III.
Connect your Gateway
IV.
Connect your Outlet Module
Cable
Modem
$Id: page2.svg 4127 2011-11-10 23:56:57Z martini $
Outlet
Module
Gateway
Power
Adapter
Ethernet
Cable
Router
Power up the Gateway.
If the Ethernet cable is plugged in correctly, you'll see a solid green light on
the left of the Ethernet port and a blinking yellow light on the right.
The green status light on top of the Gateway will come
ON
while it connects
with CORIS servers. Once successful, the status light will go
OFF
. It will blink
once in a while as it talks to the servers.
2
1
3
The Gateway and the Outlet Module should be separated by at least two feet.
Power
Adapter
Ethernet
Cable
Router
1
2
Gateway
3
Cable
Modem
Note: Some wireless
systems use all-in-one
cable modems & routers.
