Corinex Standard Repeater I & II
CXP-UFSGX-I | CXP-UFSGX-II
12
set commands. The maximum allowed range for the voltage sensing feature is 100 to 300V.
The unit is pre-calibrated in the factory and there is no need to recalibrate within its lifetime.
4.4 BPL Coupling
CXP-UFSGX has an internal three phase BPL coupler, which injects G.hn BPL signal onto the
power line. The MIMO channel configuration is as follows:
• L1-L3 Channel 1
• L2-L4 Channel 2
Note that L2 and L4 are used for AC power input as well. So, if the CXP-UFSGX is installed
within a single-phase network, make sure to use the pins L2 and L4 for powering up the de-
vice.
Return to Table of Contents
