Advanced Installation Procedure
U n p a c k C a r t o n C o n t e n t s
a ) Po w e r l i n e t o C o a x c o u p l i n g
b ) I n d u c t i v e c o u p l i n g
C o n n e c t t h e M D U G a t e w a y
1. Install 3 USB cables into the MDU Gateway.
2. Connect the MDU Gateway power cord to the MDU Gateway and to
an electrical outlet.
3. Connect the RJ45 Ethernet cable to an Internet router and to the
MDU Gateway.
4. Ensure each electrical phase is connected to an electrical outlet
near the MDU Gateway. If the outlets are not available, an electrician
must install them. There are 3 methods for MDU Gateway signal
coupling, use only one of these methods:
a) Powerline to Coax coupling
b) Inductive coupling
c) Capacitive coupling
1. Connect the 1m coax cable to module 1 (or any of the modules, but
only one) of the MDU Gateway, connect to the RF splitter input.
2. Connect the 3 other 1m coax cables to the 3 outputs of the RF
splitter.
3. Connect the 3 Powerline to Coax couplers to the 3 coax cables.
4. Connect 3 Powerline signal coupling cables to the 3 Powerline to
Coax Couplers.
5. Connect each of the 3 powerline signal coupling cables to each
electrical phase (1 outlet for each phase).
6. Continue with the Basic Installation Procedure from step number 6.
1. Connect the Powerline signal coupling cable B to the MDU Gateway
module 1 (or any of the modules, but only one) power outlet.
2. Connect each of the 3 powerline signal loop cables to each electri-
cal phase (1 outlet for each phase).
3. Continue with the Basic Installation Procedure from step number 6.
1. Connect the 1m coax cable to module 1 (or any of the modules, but
only one) of the MDU Gateway, connect to the 11+1 Coupler input.
2. Connect 3 Powerline signal coupling cables to the 11+1 Coupler.
3. Connect each of the 3 powerline signal coupling cables to each
electrical phase (1 outlet for each phase).
4. Continue with the Basic Installation Procedure from step number 6.
c ) C a p a c i t i v e c o u p l i n g
1
2
3
MDU Gateway
Breaker Panel
Electric Outlet
1 0 . 1 0 . 1 . 1
M o d u l e 1
2
3
3
3
1
4
4
4
5
5
5
( 3 - P h a s e Po w e r )
Breaker Panel
Electric Outlet
Breaker Panel
Electric Outlet
MDU Gateway
1 0 . 1 0 . 1 . 1
M o d u l e 1
1
2
2
2
MDU Gateway
1
2
2
2
3
3
3
(1) MDU Gateway
(10) AV200 Powerline Ethernet Adapters
(3) USB cables
(1) MDU Gateway power cord
(11) RJ45 Ethernet cables
(3) Powerline signal coupling cables
(3) Powerline to Coax couplers
(1) 11+1 coupler
(1) Powerline signal coupling cable B
(3) Powerline signal loop cables
(4) 1m coax cables
(6) Inductive couplers
(1) RF splitter
RJ45 Ethernet cables
Powerline signal coupling cable
MDU Gateway power cord
1. Carefully unpack all of the components from the carton.
2. The package contents should include:
RF splitter
USB cable
Powerline signal loop cable
1 m coax cable
MDU Gateway
CXP-MDU-GWY
AV200 Powerline Ethernet Adapter
CXP-AV200-ETHe
Powerline to Coax coupler
CXZ-CXP-CXC
Powerline signal coupling cable B
Inductive coupler
11+1 coupler
4
CXZ-CXP-PH12
Breaker Panel
Electric Outlet
Note: The electrician may
connect the powerline
signal coupling cables
directly to the breaker
panel to avoid installing
the 3 electrical outlets.
B
as
ic
In
st
al
la
ti
o
n
A
d
va
n
ce
d
In
st
al
la
ti
o
n
Office Connect 600
Quick Start Guide
CXP-OC600
F o r u p t o 2 0 u s e r s o n m u l t i p l e e l e c t r i c a l p h a s e s *
* For greater than 20 users or for utilizing more than one module on the MDU Gateway please see the Corinex Professional MDU Networking Installation and User Manual
