8
N31 Linear Piezo Motor User Manual
5.3 Operating
Please confirm the following information before starting the power supply:
The environment meets requirements of N31 operating environment;
The fixing screws must be tightened;
The above information is determined to perform controller related operations:
1. Please carefully read piezo controller user manual before operating, then start the
controller;
2. Set the piezo controller to zero;
3. It could work normally within the rated voltage range of piezo motor.
4. Please set the piezo controller to zero after used.
5. If abnormal noise or oscillation occurs during use, immediately turn off the power and
check parameter settings.
6.1 Transportation
Product is packed in carton. The transportation is carried out under the condition of
packaging. This product can be transported by various means of transportation under
normal conditions. During transportation, it should avoid direct rain and snow, avoid
contact with corrosive substances, and avoid strong collision, try to avoid improper
behavior such as squeezing, irregular placement.
6.2 Unpacking inspection
Please check below information:
Before opening the package, please carefully check the packaging for damage,
bruising, wetting, moisture, deformation, etc.;
Please check the parts on a case-by-case basis based on the supply contract and the
packing list;
Whether there is obvious damage on the surface of the product;
6. Transportation and Inspection
