Corega COR-BAR-AWLA-54, Руководство пользователя

Страница: 22 / 40

Figure 34. DMZ Host
DMZ Host
1. Before setting up a LAN PC to act as a DMZ Host, you should configure it using a fixed IP Address.
2. Ensure that the “
Private IP Address
” of the router is set to the default value of 192.168.1.1.
3. Click the “ DMZ Host ” option in the Advanced Menu and enter the fixed IP Address of the Exposed Host PC in the “ DMZ Host ” IP Address location. Entering “ 0 ”
will disable this application.
Multi DMZ
1. Enter the valid public IP address in “ WAN IP ” column. Next, enter the private IP address of the PC that you wish to map to in the “ LAN IP ” field. Up to five
public IP addresses can be entered.
2. Click the “ Apply ” button after making any changes, or click the “ Cancel ” button to exit the screen without saving any changes.
4-10 Dynamic Routing
The Dynamic Routing feature allows the router to exchange routing information with other routers in the network.
Figure 35. Dynamic Routing
• TX From the drop-down list, select one of the routing types:
- “
RIP-1
” is the protocol used by older routers
- “
RIP-1 Compatible
”, supports broadcast RIP-1 and multicast RIP-2
- “
RIP-2
” is the protocol used by newer routers
- Disabled
• RX From the drop-down list, select one of the routing types:
- “ RIP-1 ”
- “ RIP-2 ”
- Disabled
Click the “ Apply ” button after making any changes, or click the “ Cancel ” button to exit the screen without saving any changes.
ENGLISH
20