-4-
Use the Oral Irrigator
1. Attach nozzle onto the unit. (Fig. 2)
2. Open the water tank cap to fill the
tank with water which temperature
not exceed 40ºC, then close the cap.
(Fig. 3)
3. Or, Slide the water tank down off the
unit, fill the tank with water which
temperature not exceed 40ºC, then
attach the tank onto the unit. (Fig. 4)
4. Press “Mode” key to select the mode
you desired. During irrigating, you
can change the working mode.
(Fig. 5)
Normal:
for normal cleaning.
Soft:
for gentle cleaning of
sensitive gums.
Pulse:
for cleaning and massaging
the gums.
5. Hold the unit in an upright position
with nozzle tip point toward your
teeth.
6. Keep your mouth opened slightly so
that the water can flow out.
7. Press “On/Off” key to start irrigating.
(Fig. 6)
1). Directing the water jet flow at a
90-degree angle to the teeth
and gums
2). Directing the water jet slowly
along the teeth
3). Directing the water jet along the
gum line with the nozzle tip at a
90-degree angle to the gum
tissue
4). Cleaning between the teeth and
around any braces, crowns or
bridgework thoroughly.
Pulse / CH
Insert
Slide
Down
Fig. 2
Fig. 3
Fig. 4
Fig. 5
