Corecess Corecess 3115, Руководство пользователя

Страница: 20 / 24

21
Troubleshooting
If you cannot connect to ADSL network, please check the status of the LEDs on the front panel,
and then ensure the following:
1.
Check the LAN LED
If the LAN LED goes off, ensure that the Ethernet cable is firmly connected both to the LAN
port on the Corecess 3115 and Ethernet port on the NIC installed to your PC.
2.
Check the LINK LED
If the LINK LED blinks continuously and never stays solid on, ensure that the ADSL cable is
firmly connected to the LINE port on the Corecess 3115. If the LINK LED still blinks, contact
your ADSL service provider. If the LINK LED goes off, turn off the power of the Corecess 3115
by pressing the power switch and turn on the power again. If LINK LED still blinks, contact
your vendor.
3. Check your PC’s IP address
If all LEDs operate normally and cables are firmly connected to the ports, ensure that your
PC’s IP address is properly assigned. Otherwise, assign a new IP address according to your
operating system.
Windows 95/98/ME
n
Click the
Start
button and select
Run
.
o
Input
winipcfg
and press the
[Enter]
key.
p
Select Ethernet adapter connected with
the Corecess 3115 and click
Release All
.
q
Click
Renew All
.