20
CHARGING THE POWER CELLS IN THE
QUAD POWER PAK USING A 12V
AUTOMOTIVE POWER SUPPLY
– cont’d
The basic procedure for charging the
Power Cells using a 12V automotive
power supply is similar to using the
115V charger.
1. Insert the Power Cells into the
Quad Power Pak cavities as
outlined in Fig. 1 & 2 on Pages 16
& 17.
2. Insert the 12V charging adapter
connector (2) on the 12V charging
adapter able (3) into the power
supply receptacle (4) on the side of
the Quad Power Pak (5) (Fig. 6).
NOTE:
When inserting the 12V
charging adapter connector into the
power supply receptacle, make sure the
keys (6) on the power supply connector
are aligned and inserted into the
matching slots (7) in the power supply
receptacle (Fig. 7).
3. When the power supply connector
is fully inserted into the power
supply receptacle, lock it in place
by turning the locking collar (8)
clockwise until it is finger tight.
NOTE:
Do not use pliers to tighten the
locking collar. It may get damaged.
4. Insert the automotive charging
adapter on the end of the 12V
power supply cable into the 12V
power outlet of the car, SUV or
truck.
5. At this point, the Power Cells in the
Quad Power Pak will begin to
charge.
ASSEMBLY AND OPERATING
ASSEMBLY AND OPERATING
Fig. 6
Fig. 7
