USER MANUAL
| 5 |
Adjusting device height:
Prior to use, adjust the
height of your LifeGlider to fit your body. When
properly adjusted, the padded seat should be
positioned comfortably just beneath your tail
bone.
To adjust the device height, identify the
adjustment button on the legs. Adjust one leg at a
time by pressing in firmly on the adjustment
button to release. Then slide the leg to the desired
height, and ensure the button fully protrudes
from hole corresponding to new height setting.
Make sure all legs are set to the same height.
Moving wheel lock from right side (default) to
left:
The wheel lock is useful when getting into
or out of the LifeGlider, to prevent it from
rolling. If you wish to move the wheel lock
handle from the right side to the left, unscrew
the bolt holding it in place, move to the left
handle, and re-tighten the bolt.
Getting into the LifeGlider
Make sure the frame is fully open and all four
wheels are on the floor.
Use the wheel lock handle to lock the wheels,
and unbuckle the security belt so it hangs
down next to the seat.
