Core ColourPoint, Руководство пользователя

Страница: 10 / 20

ColourPoint User Manual V1_2 8
Function Modes
There are three modes of Operation, accessed through the FUNCTION menu;
To change Function press . Use the keys to select
“CHANGE Function” and press
to accept.
Then use the keys to select the required function as above and press .
The three modes of operation are discussed in more detail below.
All of these adjust the brightness settings for each colour.
Information for more technical users: the brightness is set using Pulse Width Modulation (PWM).
The PWM frequency is 610Hz.
Cust Col
When in Custom Colour mode the display indicates
FUNCTION
the current selected colour.
Cust Col
Simply press to step through the colours or accept
a colour value. Use keys to change the value.
Set Col.
Red: 255
Value range 0 to 255.
Set Col.
Grn: 000
Tip: Mix red & blue for purple/pink
Set Col.
Tip: Mix red & green for orange/yellow
Blu:128
Tip: Mix red & green with White for warm shades of white
Set Col.
Wht: 050
Cust
Col This mode allows the fixture to output a static Red, Green, Blue or White colour, or any
combination thereof; each colour may be set to any value 0 to 255.
Any W-DMX signal, if present, is ignored.
Static In this mode the fixture outputs a static
LEE or preset ‘cc’ colour as selected.
The selection is remembered if the unit is switched off then back on or put into another
mode.
Any W-DMX signal, if present, is ignored.
DMX In this mode the fixture is under control of Wireless DMX (W-DMX) so may be controlled
by a W-DMX compatible device or DMX compatible device with a W-DMX transmitter
attached.
The options available within DMX mode are described in more detail below.