Core Products ELT-2700, Инструкция по эксплуатации

Страница: 10 / 55

10
11
Application of Reusable Self Adhesive Electrodes
Application
1. Clean the skin area with soap and water; dry the skin area thoroughly prior to application of electrodes.
2. With electrode snapped into the CONTROL unit, remove plastic film on the ELECTRODE and securely
place on the skin, over the pain area.
3. Save the plastic film to protect adhesive during storage.
Care and Storage
1. Between uses, store the electrodes with plastic film attached, in a sealed bag.
2. Store in a cool, dry place.
3. It may be helpful to improve adhesion of electrode over repeated applications by spreading a few
drops of cold water over the adhesive; allow to air dry on a flat surface with adhesive side up.
NOTE: Over Saturation with water will reduce the adhesive properties.
NOTES:
1. Do not apply to broken skin.
2. The electrodes should be discarded when they are no longer adhering.
3. The electrodes are intended for single users only.
4. If irritation occurs, discontinue use and consult your clinician.