background image

EL281

70 min

Thank you for choosing this furniture.

PLEASE RETAIN ALL PACKING UNTIL YOU HAVE COMPLETED ASSEMBLY.

Information about your furniture.

This furniture range has been carefully crafted from solid wood, MDF and toughened glass.
Each piece is hand crafted and has unique characteristics in its finish. These are part of the natural character of the furniture itself.

Caring for your furniture.

Extreme temperature can cause slight movements in the wood framework so please avoid placing your furniture close to radiators or other 
direct sources of heat. Please avoid exposing your furniture to continued bright sunlight as this can affect the colour.

Any fluid spills should be removed as quickly as possible. Always lift your furniture when moving as dragging may cause damage to your 
furniture or flooring. Always use place mats, coasters or tablecloths to help protect against scratches and accidentally dropped items. 
Always use heat resistant mats when placing hot or cold items on to surfaces.
Do not sit or stand on glass surfaces.

After care.

Wipe all surfaces with a dry cloth and the occasional use of a normal household furniture polish on wood surfaces and a household glass 
cleaner on glass surfaces. For furniture with drawers we also recommend you use household spray polish occasionally on the drawer side 
grooves and runners as this will aid use. Please do not use detergents or chemicals on your furniture.

Specialist care.

Glass can be marked with continual use by contact with rough surfaced objects or strong coloured fluids. In the unlikely event that the glass 
is damaged it must be replaced without delay with toughened glass made to specification BS EN12150. Please consult a specialist glass 
retailer for this.

PARTS LIST

A = x38

Dowel

B = x36

40mm Screw

C = x20

25mm Screw 

D = x50

Nail

E = x4

Mag. Catch

F =  x20

20mm screw

H = x4

G = x4

Bolt

Handle

BEFORE YOU START ASSEMBLY

Please check that you have all the correct parts and fittings as detailed on the assembly instructions.

FOR DAMAGED/REPLACEMENT PARTS

Batch Number: 

PLEASE RETAIN THIS LEAFLET ALONG WITH YOUR DELIVERY NOTE/RECEIPT FOR FUTURE REFERENCE

BEFORE YOU START ASSEMBLY

 please store the carton for 48 hours or more so the contents can acclimatise. 

Please visit www.coreproducts.co.uk/parts 

Содержание Elgin EL281







Отзывы: