1
Tip: during assembly
place unit onto a work
surface with a clean cover
A = x4
Dowel
C = x12
25mm Screw
2
3
A = x16
B = x8
40mm Screw
4
5
D = x16
Nail
Страница 1: ...our furniture when moving as dragging can cause damage to your furniture or flooring Extreme changes in temperature humidity during transit may result in a powder residue forming so silica gel bags have been included to alleviate this natural occurrence This residue is harmless and can easily be removed before assembly with a damp cloth and mild detergent After care Wipe the surfaces with a dry cl...
Страница 2: ...assembly place unit onto a work surface with a clean cover A x4 Dowel C x12 25mm Screw 2 3 A x16 B x8 Dowel 40mm Screw 4 5 Tip during assembly place unit onto a work D x16 surface with a clean cover A x16 Nail Dowel ...
Страница 3: ...Tip during assembly place unit onto a work surface with a clean cover Note drawer pedestal can be turned around allowing it to be positioned on the left or on the right of assembled desk dressing table B x12 40mm Screw 9 G x6 Bolt F x3 Knob C x36 25mm Screw ...
Страница 4: ... strip to the back edge of the furniture top using the 15mm screw washer and securely tighten Place fixing strip against the wall and mark position for drilling hole Drill hole in your wall to a depth of 30mm using a 6mm drill bit If the surface of your wall is soft and crumbly we would advise you to use a 5mm drill bit for a tighter fit Insert plug into hole with end flush to the wall surface 10 ...
