1
Tip: during assembly
place unit onto a work
surface with a clean cover
C = x16
25mm Screw
2
A = x16
Dowel
3
B = x6
40mm Screw
Страница 1: ...ble Always lift your furniture when moving as dragging can cause damage to your furniture or flooring Extreme changes in temperature humidity during transit may result in a powder residue forming so silica gel bags have been included to alleviate this natural occurrence This residue is harmless and can easily be removed before assembly with a damp cloth and mild detergent After care Wipe the surfa...
Страница 2: ...1 Tip during assembly place unit onto a work surface with a clean cover C x16 25mm Screw 2 A x16 Dowel 3 Tip during assembly place unit onto a work surface with a clean cover B x6 40mm Screw ...
Страница 3: ...place unit onto a work surface with a clean cover B x6 40mm Screw 5 Tip Place top of unit over the edge of the work surface to ensure the top does not mark during assembly D x24 Nail 6 C x48 25mm Screw E x8 Handle F x16 Bolt ...
Страница 4: ...g strip to the back edge of the furniture top using the 15mm screw washer and securely tighten Place fixing strip against the wall and mark position for drilling hole Drill hole in your wall to a depth of 30mm using a 6mm drill bit If the surface of your wall is soft and crumbly we would advise you to use a 5mm drill bit for a tighter fit Insert plug into hole with end flush to the wall surface 7 ...
